{"authors":[{"id":"585192966","orcid":"","email":"","name":"Justin D. Hanselman","affiliation":"Hope College"},{"id":"1570719935","orcid":"0000-0002-5288-3744","email":"kopek@hope.edu","name":"Benjamin G. Kopek","affiliation":"Department of Biology, Hope College"}],"bricks":[{"abstract":"","id":"275576586","functions":[{"id":"2112220587","description":"","implementations":[{"id":"1994175742","quantity":1,"type":"brick"},{"id":"1718413669","quantity":1,"type":"brick"},{"id":"2008397736","quantity":1,"type":"brick"},{"id":"612775392","quantity":1,"type":"brick"},{"id":"1599450779","quantity":1,"type":"brick"},{"id":"1770657789","quantity":1,"type":"brick"},{"id":"1212037556","quantity":1,"type":"brick"},{"id":"171866889","quantity":1,"type":"brick"},{"id":"1494318766","quantity":1,"type":"brick"}]},{"id":"195975849","description":"","implementations":[]}],"authors":[],"files":[{"url":".\/.\/usdata\/PhysicalAssemblyBeamSide.jpg"},{"url":".\/.\/usdata\/PhysicalAssemblyCameraSide.jpg"}],"long_description":"Overview of the fully assembled microscope.","instructions":[{"name":"assembly","steps":[]}],"name":"Super-resolution Fluorescence Microscope","license":"CC-BY 3.0","notes":""},{"abstract":"","id":"1994175742","functions":[{"id":"1449739480","description":"","implementations":[{"id":"1854461583","quantity":1,"type":"part"},{"id":"1540219253","quantity":4,"type":"part"},{"id":"1663798749","quantity":4,"type":"part"},{"id":"1970249459","quantity":4,"type":"part"},{"id":"1651425089","quantity":4,"type":"part"},{"id":"1715516067","quantity":1,"type":"part"},{"id":"33719668","quantity":4,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/LaserBoxAndStandAssemblyExploded.png"}],"long_description":"A custom built stand for the laser unit.","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Secure the four 25mm Posts (5) to the Laser Stand Plate (3) using four Hex Drive Flat Head Screws (2).","components":[]},{"files":[],"description":"Screw four 31.8 mm Studded Pedestal Base Adapters (6) into the bottoms of the four 25mm Posts (5).","components":[]},{"files":[],"description":"Secure the laser unit (1) to the custom laser stand plate (3) using four socket head screws (1\/4\"-20, 1 \" long) (4).","components":[{"id":"1449739480","quantity":"1"}]},{"files":[],"description":"The laser stand unit can be secured in an appropriate location on an optical breadboard. (see overview of microscope system). It may be necessary to add additional height to the Optics Posts due to the uncertainty of height of the raster mirrors in the laser. This can only be verified by ensuring the center of the raster. 25mm Post Spacers can be screwed onto the other Posts to provide the necessary height.","components":[]}]}],"name":"Laser Box & Stand","license":"","notes":"The laser unit should be mounted on a stand so that the beam is able to be projected straight for alignment purposes."},{"abstract":"","id":"1718413669","functions":[{"id":"710088336","description":"","implementations":[{"id":"1651425089","quantity":4,"type":"part"},{"id":"1970249459","quantity":4,"type":"part"},{"id":"1335646361","quantity":4,"type":"part"},{"id":"1558918840","quantity":1,"type":"part"},{"id":"1540219253","quantity":4,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/Vertical-Line-Assembly-Outer.png"}],"long_description":"Main support for the vertical line of the imaging system.","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Position Clamping Forks (1) in appropriate location on the optical breadboard (see overall schematic). For spacing, one can use the Translation Stage Mount Plate as a guide.","components":[]},{"files":[],"description":"Slide 31.8 mm Studded Pedestal Base Adapters (2) into Clamping Forks (1).","components":[]},{"files":[],"description":"Screw 25.0 mm Pillar Posts (3) into 31.8 mm Studded Pedestal Base Adapters (2).","components":[]},{"files":[],"description":"Position Custom XY Sample Translation Stage Mount Plate (6) so that holes line up with Pillar Posts (3). Screw Mount Plate (6) to Pillar Posts (3) using Socket Head Screws (6).","components":[]},{"files":[],"description":"Perform final positioning of Clamping Forks and tighten.","components":[]}]}],"name":"Stage Support Assembly","license":"","notes":""},{"abstract":"","id":"2008397736","functions":[{"id":"585169899","description":"","implementations":[{"id":"42248522","quantity":1,"type":"part"},{"id":"1715353230","quantity":1,"type":"part"},{"id":"1997220404","quantity":1,"type":"part"},{"id":"2079060766","quantity":1,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/Vertical-Line-Assembly-Inner.png"}],"long_description":"","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Screw 100X objective (8) into Adapter (9) with External SM1 Threads and Internal RMS Threads.","components":[]},{"files":[],"description":"Screw Objective\/Adapter into Translation Stage (10).","components":[]},{"files":[],"description":"Screw Differential Adjuster (11) into Translation Stage (10).","components":[]}]}],"name":"Objective Mount and Z-Translation Mechanism","license":"","notes":""},{"abstract":"","id":"612775392","functions":[{"id":"1923275626","description":"","implementations":[{"id":"619121990","quantity":1,"type":"part"},{"id":"1004329692","quantity":1,"type":"part"},{"id":"1636443401","quantity":1,"type":"part"},{"id":"245102677","quantity":1,"type":"part"},{"id":"878925890","quantity":1,"type":"part"},{"id":"214211596","quantity":1,"type":"part"},{"id":"1745862721","quantity":1,"type":"part"},{"id":"993412938","quantity":1,"type":"part"},{"id":"161358789","quantity":1,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/0-0-Vertical-Line-Assembly-Inner.png"}],"long_description":"","instructions":[{"name":"assembly","steps":[{"files":[],"description":"To insert the Dielectric Mirror (20) into the Right-Angle Kinematic Mirror Mount (21), loosen the screws and remove the mirror holder. Place the Mirror (20) into the support (use gloves or handle only by edges) and reattach mirror support to the rest of the Mounting unit.","components":[]},{"files":[],"description":"Screw SM1 Coupler (22) into top of Mirror Mount (21).","components":[]},{"files":[],"description":"Screw f=200 mm lens (23) into SM1 coupler (22).","components":[]},{"files":[],"description":"Attach right Right-Angle Kinematic Mirror Mount with mirror and lens into the bottom of 30 mm Cage Cube (24).","components":[]},{"files":[],"description":"Mount the 30 mm Filter Mount (26) to the Kinematic Cage Cube Platform (27) using two M3 cap screws.","components":[]},{"files":[],"description":"The Filter Holder has a spring-loaded clamping mechanism. To mount the Dichroic beamsplitter (25), apply a horizontal force to the clamps, insert the beamsplitter into the chanel, and release the clamps. When working with the beamsplitter be sure to use gloves or handle only by the edges.","components":[]},{"files":[{"url":".\/.\/usdata\/Kinematic_Cube_Platform_A1-780.jpg"}],"description":"Attach the Kinematic Cage Cube Platform with attached Filter Holder to the 30 mm Cage Cube using the screws included with the Cube Platform. Look at diagram for correct orientation.","components":[]},{"files":[],"description":"Screw on Dust Cap (12) in appropriate location on 30 mm Cage Cube, referring to diagram for correct orientation.","components":[]}]}],"name":"Mirror and Filter Assembly","license":"","notes":"A variety of filters can be used according to the needs of the investigator and desired excition and emission wavelengths. The parts and filters we describe here are appropriate for excitation and emission of Alexa Fluor 647."},{"abstract":"","id":"1599450779","functions":[{"id":"1652322488","description":"","implementations":[{"id":"1718413669","quantity":1,"type":"brick"},{"id":"612775392","quantity":1,"type":"brick"},{"id":"2008397736","quantity":1,"type":"brick"},{"id":"1150302875","quantity":4,"type":"part"},{"id":"1728764877","quantity":4,"type":"part"},{"id":"1788309638","quantity":1,"type":"part"},{"id":"305044356","quantity":4,"type":"part"},{"id":"1549084167","quantity":1,"type":"part"},{"id":"483424046","quantity":1,"type":"part"},{"id":"159153016","quantity":2,"type":"part"},{"id":"1332802642","quantity":1,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/0-Vertical-Line-Assembly-Inner.png"},{"url":".\/.\/usdata\/0-Vertical-Line-Assembly-Outer.png"}],"long_description":"Assembly of the sample stage, mirror and filter assembly, and objective mount and Z-translation mechanism.","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Screw the four 4\" long Cage Assembly Rods (28) into top of the Cage Cube of the Mirror and Filter Assembly (24).","components":[]},{"files":[],"description":"Attach the Mirror and Filter Assembly to the bottom of Custom Mount Plate (5) of the Stage Support Assembly using four 0.5\" long Socket Head Screws 4-40 (29).","components":[]},{"files":[],"description":"Attach the Objective Mount and Z-translation Mechanism to the Cage Assembly Rods above the Mirror and Filter Assembly. Secure the Mount to the Cage Rods using two 4-40 and two M3 cap screws. The Objective Mount can be adjusted along the rods. The correct position of the objective is determined empirically using a sample.","components":[]},{"files":[],"description":"Attach the Sample Stage (7) to the Aluminum Mount Plate using four M4 x 0.7 mm Socket Head Screws (12 mm long) (4).","components":[]},{"files":[],"description":"A Bandpass filter (green or red) can be place in the Cage Cube below the beamsplitter according to the fluorophore being imaged. The Filters listed here will \"sit\" in the Cage cube. Changing the filters can be somewhat difficult, but can be aided using forceps. Be cautious not to touch the filters with bare hands.","components":[]},{"files":[],"description":"For safety, we cut a small square of black foam board (18) to cover the side of the Cage cube using M3 x 0.5 mm (8 mm long) button head screws (17).","components":[]}]}],"name":"Vertical Line Assembly","license":"","notes":""},{"abstract":"","id":"1770657789","functions":[{"id":"234951831","description":"","implementations":[{"id":"1651425089","quantity":1,"type":"part"},{"id":"1970249459","quantity":1,"type":"part"},{"id":"138472799","quantity":1,"type":"part"},{"id":"33719668","quantity":1,"type":"part"},{"id":"540364524","quantity":1,"type":"part"},{"id":"31738501","quantity":1,"type":"part"},{"id":"743875788","quantity":1,"type":"part"},{"id":"202884993","quantity":1,"type":"part"},{"id":"1636443401","quantity":1,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/Camera-Tube-Assembly-Exploded.png"}],"long_description":"Attaching camera to system.","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Thread the Adapter with External C-Mount Threads (7) onto the camera lens.","components":[]},{"files":[],"description":"Attach the SM1 Lens Tube (8) onto the Adapter with External C-Mount Threads.","components":[]},{"files":[],"description":"Attach the SM1 Coupler (9) to the SM1 Lens Tube (8).","components":[]},{"files":[],"description":"Position the Short Clamping Fork (1) at the approximate location specific for ones set-up.","components":[]},{"files":[],"description":"Screw the Post Holder (2) into the Studded Pedstal base (3).","components":[]},{"files":[],"description":"Use the Clamping Fork (1) to Clamp the Studded Pedstal Base (3).","components":[]},{"files":[],"description":"Screw the Adapter (5) with Internal M4 x 0.7 Threads onto the Optical Post (4).","components":[]},{"files":[],"description":"Attach the Adapter\/Optical post to the Camera (6).","components":[]},{"files":[],"description":"Position the Camera by placing the attached Optical Post into the Post Holder. One can adjust to the desired height using the Post Holder with Spring-Loaded Hex Lock.","components":[]}]}],"name":"Camera Line","license":"","notes":""},{"abstract":"","id":"1212037556","functions":[{"id":"548289988","description":"","implementations":[{"id":"1172382293","quantity":1,"type":"part"},{"id":"1947411957","quantity":1,"type":"part"},{"id":"634050904","quantity":1,"type":"part"},{"id":"134265758","quantity":2,"type":"part"},{"id":"430393902","quantity":2,"type":"part"},{"id":"1612010827","quantity":1,"type":"part"},{"id":"1746782452","quantity":4,"type":"part"},{"id":"595388234","quantity":2,"type":"part"},{"id":"1592805244","quantity":1,"type":"part"},{"id":"207421269","quantity":0,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/Autofocus-Assembly-Exploded.png"}],"long_description":"Components and assembly of the autofocus system.","instructions":[{"name":"assembly","steps":[]}],"name":"Autofocus","license":"","notes":""},{"abstract":"","id":"171866889","functions":[{"id":"10704307","description":"","implementations":[{"id":"1300675893","quantity":4,"type":"part"},{"id":"1253581193","quantity":2,"type":"part"},{"id":"1363123240","quantity":1,"type":"part"},{"id":"416675147","quantity":1,"type":"part"},{"id":"1769339429","quantity":1,"type":"part"},{"id":"1506841281","quantity":1,"type":"part"},{"id":"540364524","quantity":1,"type":"part"},{"id":"1065137023","quantity":1,"type":"part"},{"id":"1004329692","quantity":1,"type":"part"},{"id":"619121990","quantity":1,"type":"part"},{"id":"310292384","quantity":1,"type":"part"},{"id":"691502391","quantity":2,"type":"part"},{"id":"1675867349","quantity":1,"type":"part"},{"id":"93878551","quantity":1,"type":"part"},{"id":"1964403163","quantity":1,"type":"part"},{"id":"1178746898","quantity":4,"type":"part"},{"id":"1150302875","quantity":6,"type":"part"},{"id":"1970249459","quantity":5,"type":"part"},{"id":"1651425089","quantity":5,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/Bean-Expander-Assembly-Exploded.png"}],"long_description":"Assembly of components between the laser and Mirror and Filter Assembly.","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Attach Cage Plate (2) to Lens Tube Coupler (3).","components":[]},{"files":[],"description":"Attach Extension Tube (4) to Cage Plate\/Lens Tube Coupler from previous step.","components":[]},{"files":[],"description":"Attach other Cage Plate to opposite end of Extension Cube.","components":[]},{"files":[],"description":"Screw two Optical Posts (150 mm) (1) into two Studded Pedstal Base Adapters (18).","components":[]},{"files":[],"description":"Screw Optical Posts with Base Adapters into the Cage Plates on opposite ends of the Extension Tube.","components":[]},{"files":[],"description":"Attach the full Extension Tube Assembly to the Optical Breadboard at the appropriate locations for microscope set-up using Clamping Forks (19).","components":[]},{"files":[],"description":"Insert Dielectric Mirror (10) into Right Angle Kinematic Mirror Mount (9).","components":[]},{"files":[],"description":"Attach one Optical Post (150 mm) into studded Pedestal Base.","components":[]},{"files":[],"description":"Screw Optical Posts with Base Adapter into the bottom of the Right Angle Kinematic Mirror Mount (9).","components":[]},{"files":[],"description":"Attach the Right Angle Kinematic Mirror on the Optical Post to the Optical Breadboard using a Clamping Fork. Attach this to the Optical Breadboard at an appropriate location for your set-up, approximately 4 inches from the end of the previously mounted Extension Tube Assembly.","components":[]},{"files":[],"description":"Screw the Iris Diapraghm (11) onto the XY-translating ring mount (12).","components":[]},{"files":[],"description":"Screw the f=30 mm Achromatic Doublet (13) lens onto the other side of the XY-translating ring mount.","components":[]},{"files":[],"description":"Slide the four Cage Assembly Rods (8\" long) through the XY-translating ring mount.","components":[]},{"files":[],"description":"Screw the f=100 Achromatic Doublet lens (14) onto another XY-translating ring mount.","components":[]},{"files":[],"description":"Slide the XY-translating Ring Mount onto the four Cage Assembly Rods that the other XY-translating ring mount with the f=30 mm lens was already slid onto. Orient the Ring Mounts according to the diagram.","components":[]},{"files":[],"description":"Attach a Cage Plate (15) to the ends of the four Cage Assembly Rods (16) through which the lens are mounted by screwing the rods into the cage plate.","components":[]},{"files":[],"description":"Screw an Optical Post (150 mm) onto a Studded Pedestal Base Adapter.","components":[]},{"files":[],"description":"Screw the Optical Post into the Cage Plate with the Assembly Rods and Lenses.","components":[]},{"files":[],"description":"Screw the free ends of the Cage Assembly Rods of the unit containing the lenses into the Right Angle Kinematic Mirror Mount.","components":[]},{"files":[],"description":"Attach the free Optical Post attached to the Cage Plate to the Optical Breadboard using a Clamp.","components":[]}]}],"name":"Excitation Beam Line","license":"","notes":""},{"abstract":"","id":"1494318766","functions":[{"id":"1075372608","description":"","implementations":[{"id":"552521340","quantity":1,"type":"part"},{"id":"732866040","quantity":1,"type":"part"},{"id":"433864033","quantity":1,"type":"part"},{"id":"2130531101","quantity":2,"type":"part"},{"id":"305044356","quantity":4,"type":"part"},{"id":"1219524197","quantity":8,"type":"part"},{"id":"122175889","quantity":8,"type":"part"},{"id":"1788309638","quantity":0,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/Chamber-And-Flat-Slide-OWIS-Mount.png"}],"long_description":"Custom designed holder to fit on the OWIS stage. Holds a chambered coverslip.","instructions":[{"name":"assembly","steps":[{"files":[],"description":"Place the compression springs over the threads of eight 25 mm long M6 x 1.0 mm socket head screws. Attach spring clamps to the base using the eight 25 mm long M6 x 1.0 mm socket head screws onto which the compression springs were threaded.","components":[]},{"files":[],"description":"Attach the fully assembled custom coverslip holder to the OWIS sample XY translation stage using M4 x 0.7 mm socket head screws. This may be done after the stage has already been assembled with the rest of the system.","components":[]}]}],"name":"Chambered Coverslip Holder","license":"","notes":""}],"parts":[{"id":"1854461583","files":[],"description":"Red-green-blue entertainment laser unit.","name":"Laser","manufacturing_instruction":{"steps":[]},"supplier_part_num":"PRO-1600RGB","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.laserworld.com\/shop\/laserworld-lasers\/proline-series\/laserworld-pro-1600rgb","supplier":"LaserWorld"},{"id":"42248522","files":[{"url":".\/.\/usdata\/RMS100X-PFO-AutoCADPDF-2.png"}],"description":"Plan Fluorite Oil Immersion Objective, 1.30 NA, 0.20 mm WD","name":"100x Objective","manufacturing_instruction":{"steps":[]},"supplier_part_num":"RMS100X-PFO","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=RMS100X-PFO","supplier":"Thorlabs"},{"id":"1273959861","files":[],"description":"","name":"Immersion Oil for Objective","manufacturing_instruction":{"steps":[]},"supplier_part_num":"MOIL-30","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=MOIL-30","supplier":"Thorlabs"},{"id":"1181552474","files":[{"url":".\/.\/usdata\/B3048F-AutoCADPDF.png"}],"description":"30\" x 48\" x 2.4\", 1\/4\"-20 Mounting Holes","name":"Breadboard, Nexus","manufacturing_instruction":{"steps":[]},"supplier_part_num":"B3048F","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=B3048F","supplier":"Thorlabs"},{"id":"31738501","files":[],"description":"CCD camera with 2.8 MegaPixels","name":"Camera","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"Retiga R3","material_unit":"NONE","url":"https:\/\/www.qimaging.com\/products\/cameras\/scientific\/retiga-r3.php","supplier":"Mager Scientific"},{"id":"245102677","files":[{"url":".\/.\/usdata\/AC254-200-A-ML-AutoCADPDF.png"}],"description":"","name":"Lens f=200 mm, 1\" Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"AC254-200-A-ML","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=AC254-200-A-ML","supplier":"Thorlabs"},{"id":"1675867349","files":[{"url":".\/.\/usdata\/AC254-030-A-ML-AutoCADPDF.png"}],"description":"","name":"Lens f=30 mm, 1\" Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"AC254-030-A-ML","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=AC254-030-A-ML","supplier":"Thorlabs"},{"id":"93878551","files":[{"url":".\/.\/usdata\/AC254-100-A-ML-AutoCADPDF.png"}],"description":"","name":"Lens f=100 mm, 1\" Achromatic Doublet, SM1-Threaded Mount, ARC: 400-700 nm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"AC254-100-A-ML","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=AC254-100-A-ML","supplier":"Thorlabs"},{"id":"214211596","files":[{"url":".\/.\/usdata\/SemrockFilterDetails.png"}],"description":"Dual-edge standard epi-fluorescence dichroic beamsplitter","name":"Dichroic beamsplitter 545\/640 nm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"FF545\/650-Di01-25x36","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.semrock.com\/filterdetails.aspx?id=ff545\/650-di01-25x36","supplier":"Semrock"},{"id":"1549084167","files":[],"description":"","name":"Bandpass filter red, 25mm (700\/75)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"ET700\/75m","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.chroma.com\/products\/parts\/et700-75m","supplier":"Chroma"},{"id":"483424046","files":[{"url":".\/.\/usdata\/SemrockFilterDetails582.png"}],"description":"582\/75 nm single-band bandpass filter, 25 mm x 5.0 mm","name":"Bandpass filter green, 25mm (582\/75)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"FF01-582\/75-25","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.semrock.com\/filterdetails.aspx?id=ff01-582\/75-25","supplier":"Semrock"},{"id":"1663798749","files":[{"url":".\/.\/usdata\/RS38_M-AutoCADPDF.png"}],"description":"RS38\/M - 25.0 mm Pillar Post, M6 Taps, L = 38 mm, M4 Adapter Included","name":"25mm Post, (38 mm height*)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"RS38\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=RS38\/M","supplier":"Thorlabs"},{"id":"1970249459","files":[{"url":".\/.\/usdata\/BE1_M-AutoCADPDF.png"}],"description":"For clamping to optical breadboard.","name":"31.8 mm Studded Pedestal Base Adapter, M6 Thread","manufacturing_instruction":{"steps":[]},"supplier_part_num":"BE1\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=BE1\/M#ad-image-0","supplier":"Thorlabs"},{"id":"1651425089","files":[{"url":".\/.\/usdata\/CF125-AutoCADPDF.png"}],"description":"For adjustable positioning of platform on board.","name":"Short Clamping Fork, 1.24\" Counterbored Slot, Universal","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CF125","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=CF125#ad-image-0","supplier":"Thorlabs"},{"id":"1279133013","files":[{"url":".\/.\/usdata\/RS5M-AutoCADPDF.png"}],"description":"25 mm Post Spacer, Thickness = 5 mm. \nDue to the uncertainty of height of the raster mirrors in the laser, it may be necessary to add additional height to the Optics Posts and screws holding them. This can only be verified by ensuring the center of the raster mirror is approximately centered on the beam-line after it is setup.","name":"25mm Post Spacers","manufacturing_instruction":{"steps":[]},"supplier_part_num":"RS5M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=RS5M","supplier":"Thorlabs"},{"id":"416675147","files":[{"url":".\/.\/usdata\/SM1E60-AutoCADPDF.png"}],"description":"SM1 Extension Tube, 6\" Long, 1\" Thread Depth, One Retaining Ring Included","name":"1\" Extension Tube, SM1 Threaded, 6\" Long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1E60","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1E60","supplier":"Thorlabs"},{"id":"1363123240","files":[{"url":".\/.\/usdata\/SM1T10-AutoCADPDF.png"}],"description":"SM1 (1.035\"-40) Coupler, External Threads, 1\" Long","name":"1\" Lens Tube Coupler, SM1, 1\" Long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1T10","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1T10","supplier":"Thorlabs"},{"id":"1253581193","files":[{"url":".\/.\/usdata\/CP02_M-AutoCADPDF.png"}],"description":"SM1-Threaded 30 mm Cage Plate, 0.35\" Thick, 2 Retaining Rings, M4 Tap","name":"SM1-Threaded 30 mm Cage Plate, 0.35\" Thick, 2 Retaining Rings, M4 Tap","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CP02\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=CP02\/M","supplier":"Thorlabs"},{"id":"1065137023","files":[{"url":".\/.\/usdata\/prnt_54082.png"}],"description":"Neutral Density Filter, optical density 0.04-4.0. Includes 4\" long, 0.5\" diameter post.","name":"100mm Diameter 0.04-4.0 OD, Circular ND Filter","manufacturing_instruction":{"steps":[]},"supplier_part_num":"54-082","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.edmundoptics.com\/p\/100mm-diameter-0.04-4.0-od-circular-nd-filter\/10995\/","supplier":"Edmund Optics"},{"id":"540364524","files":[{"url":".\/.\/usdata\/AS4M25E-AutoCADPDF.png"}],"description":"","name":"Adapter with Internal M4 x 0.7 Threads and External 1\/4\"-20 Threaded Stud","manufacturing_instruction":{"steps":[]},"supplier_part_num":"AS4M25E","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=AS4M25E","supplier":"Thorlabs"},{"id":"1506841281","files":[],"description":"","name":"12.7 mm Optical Post, 100 mm Height","manufacturing_instruction":{"steps":[]},"supplier_part_num":"TR100\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=TR100\/M","supplier":"Thorlabs"},{"id":"1769339429","files":[{"url":".\/.\/usdata\/PH3-AutoCADPDF.png"}],"description":"","name":"1\/2\" Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L = 3\"","manufacturing_instruction":{"steps":[]},"supplier_part_num":"PH3","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=PH3#ad-image-0","supplier":"Thorlabs"},{"id":"1004329692","files":[{"url":".\/.\/usdata\/KCB1-AutoCADPDF.png"}],"description":"","name":"Right-Angle Kinematic Mirror Mount, 30 mm Cage System and SM1 Compatible, M4 and M6 Mounting Holes","manufacturing_instruction":{"steps":[]},"supplier_part_num":"KCB1\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=KCB1#ad-image-0","supplier":"Thorlabs"},{"id":"619121990","files":[{"url":".\/.\/usdata\/BB1-E02-AutoCADPDF.png"}],"description":"","name":"1\" Broadband Dielectric Mirror, 400 - 750 nm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"BB1-E02","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=BB1-E02","supplier":"Thorlabs"},{"id":"310292384","files":[{"url":".\/.\/usdata\/SM1D12D-AutoCADPDF.png"}],"description":"","name":"SM1 Ring-Actuated Iris Diaphragm (0.8 - 12 mm)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1D12D","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1D12D","supplier":"Thorlabs"},{"id":"1150302875","files":[{"url":".\/.\/usdata\/ER4-AutoCADPDF.png"}],"description":"","name":"Cage Assembly Rod, 4\" Long, 6 mm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"ER4","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=ER4","supplier":"Thorlabs"},{"id":"1178746898","files":[{"url":".\/.\/usdata\/ER8-AutoCADPDF.png"}],"description":"","name":"Cage Assembly Rod, 8\" Long, 6 mm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"ER8","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=ER8","supplier":"Thorlabs"},{"id":"1964403163","files":[{"url":".\/.\/usdata\/CP03_M-AutoCADPDF.png"}],"description":"","name":"35 mm Aperture, 30 mm Cage Plate, 0.35\" Thick, M4 Tap","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CP03\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=CP03\/M","supplier":"Thorlabs"},{"id":"1300675893","files":[{"url":".\/.\/usdata\/TR150_M-AutoCADPDF.png"}],"description":"","name":"12.7 mm Optical Post, 150 mm Height","manufacturing_instruction":{"steps":[]},"supplier_part_num":"TR150\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=TR150\/M","supplier":"Thorlabs"},{"id":"878925890","files":[{"url":".\/.\/usdata\/C4W-AutoCADPDF.png"}],"description":"","name":"30 mm Cage Cube","manufacturing_instruction":{"steps":[]},"supplier_part_num":"C4W","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=C4W","supplier":"Thorlabs"},{"id":"993412938","files":[{"url":".\/.\/usdata\/B4C_M-AutoCADPDF.png"}],"description":"","name":"Kinematic Cage Cube Platform for C4W\/C6W, Metric","manufacturing_instruction":{"steps":[]},"supplier_part_num":"B4C\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=B4C\/M","supplier":"Thorlabs"},{"id":"1745862721","files":[{"url":".\/.\/usdata\/FFM1-AutoCADPDF.png"}],"description":"","name":"30-mm-Cage-Compatible Rectangular Filter Mount","manufacturing_instruction":{"steps":[]},"supplier_part_num":"FFM1","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=FFM1","supplier":"Thorlabs"},{"id":"161358789","files":[{"url":".\/.\/usdata\/SM1EC2B-AutoCADPDF.png"}],"description":"","name":"Snap-On Plastic Dust Cap for SM1 Lens Tubes","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1EC2B","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1EC2B","supplier":"Thorlabs"},{"id":"2079060766","files":[{"url":".\/.\/usdata\/DM10-AutoCADPDF.png"}],"description":"","name":"Differential Adjuster For Translation Stages, 1\/2\" Travel","manufacturing_instruction":{"steps":[]},"supplier_part_num":"DM10","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=DM10","supplier":"Thorlabs"},{"id":"1715353230","files":[{"url":".\/.\/usdata\/SM1A3-AutoCADPDF.png"}],"description":"","name":"Adapter with External SM1 Threads and Internal RMS Threads","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1A3","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1A3","supplier":"Thorlabs"},{"id":"1788309638","files":[{"url":".\/.\/usdata\/pi_kt_90.png"}],"description":"Alternative stages exist on Thorlabs, which may be easier to obtain for U.S. customers. One should also consider types of samples to be imaged.","name":"Sample XY Translation Stage 90KT with fine-thread spindles","manufacturing_instruction":{"steps":[]},"supplier_part_num":"19.392.1330","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.owis.eu\/en\/products\/manual-positioning-systems\/produktgruppe\/kreuztische\/produkt\/97\/","supplier":"Owis"},{"id":"1335646361","files":[{"url":".\/.\/usdata\/RS300_M-AutoCADPDF.png"}],"description":"","name":"25.0 mm Pillar Post, M6 Taps, (300mm height)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"RS300\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=RS300\/M","supplier":"Thorlabs"},{"id":"743875788","files":[{"url":".\/.\/usdata\/SM1A9-AutoCADPDF.png"}],"description":"","name":"Adapter with External C-Mount Threads and Internal SM1 Threads","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1A9","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1A9","supplier":"Thorlabs"},{"id":"202884993","files":[{"url":".\/.\/usdata\/SM1L25-AutoCADPDF.png"}],"description":"","name":"SM1 Lens Tube, 2.50\" Thread Depth","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1L25","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1L25","supplier":"Thorlabs"},{"id":"64918987","files":[{"url":".\/.\/usdata\/SM1T30-AutoCADPDF.png"}],"description":"","name":"SM1 (1.035\"-40) Coupler, External Threads, 3\" Long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1T30","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1T30","supplier":"Thorlabs"},{"id":"33719668","files":[{"url":".\/.\/usdata\/TR30_M-AutoCADPDF.png"}],"description":"","name":"12.7 mm Optical Post, 30 mm Height","manufacturing_instruction":{"steps":[]},"supplier_part_num":"TR30\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=TR30\/M","supplier":"Thorlabs"},{"id":"138472799","files":[{"url":".\/.\/usdata\/PH40_M-AutoCADPDF.png"}],"description":"","name":"12.7 mm Post Holder, Spring-Loaded Hex-Locking Thumbscrew, L=40 mm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"PH40\/M","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=PH40\/M#ad-image-0","supplier":"Thorlabs"},{"id":"1636443401","files":[{"url":".\/.\/usdata\/SM1T2-AutoCADPDF.png"}],"description":"","name":"SM1 (1.035\"-40) Coupler, External Threads, 0.5\" Long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"SM1T2","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=SM1T2","supplier":"Thorlabs"},{"id":"1728764877","files":[{"url":".\/.\/usdata\/92196A110_18-8 STAINLESS STEEL SOCKET HEAD CAP SCREW.png"}],"description":"Microscope Mechanical Fasteners","name":"Socket Head Screw 4-40 ( 0.5\" long)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"92196A110","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#92196a110\/=1dxsiaa","supplier":"McMaster-Carr"},{"id":"159153016","files":[{"url":".\/.\/usdata\/92095A181_18-8 SS BUTTON-HEAD SOCKET CAP SCREW.png"}],"description":"Microscope mechanical fasteners. Passivated 18-8 stainless steel.","name":"Button Head Hex Drive Screw M3 x 0.5 mm Thread, 8 mm long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"92095A181","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#92095a181\/=1dxsk1x","supplier":"McMaster-Carr"},{"id":"1540219253","files":[{"url":".\/.\/usdata\/93395A357_TYPE 316 SS FLAT-HEAD SOCKET CAP SCREW.png"}],"description":"Microscope mechanical fasteners. 316 Stainless Steel Hex Drive Flat Head Screw 90 Degree Countersink, M6 x 1.00mm Thread, 16mm Long","name":"Hex Drive Flat Head Screw M6 x 1 mm, 16mm long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"93395A357","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#93395a357\/=1dxslgm","supplier":"McMaster-Carr"},{"id":"305044356","files":[{"url":".\/.\/usdata\/91292A117_TYPE 18-8 SS SOCKET HEAD CAP SCREW.png"}],"description":"Microscope mechanical fastener. 18-8 stanless steel socket head screw.","name":"Socket Head Screw M4 x 0.7 mm, 12mm long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"91292A117","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#91292a117\/=1dxsp8p","supplier":"McMaster-Carr"},{"id":"1219524197","files":[{"url":".\/.\/usdata\/91290A330_BLACK-OXIDE CLASS 12.9 SOCKET HEAD CAP SCREW.png"}],"description":"Microscope mechanical fastener. Black-oxide alloy steel socket head screw.","name":"Socket Head Screw M6 x 1.0 mm, 25 mm long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"91290A330","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#91290a330\/=1dxsqzm","supplier":"McMaster-Carr"},{"id":"122175889","files":[{"url":".\/.\/usdata\/9657K273_STEEL COMPRESSION SPRING.png"}],"description":"For use with 3-D printed chambered coverslip holder. May be larger if print tolerances require it.","name":"Compression Spring, Zinc-Plated Wire, Closed and Flat End, 1\/2\" Long, 0.248\" ID","manufacturing_instruction":{"steps":[]},"supplier_part_num":"9657K273","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#9657k273\/=1dxssgx","supplier":"McMaster-Carr"},{"id":"337979948","files":[{"url":".\/.\/usdata\/92196A540_18-8 STAINLESS STEEL SOCKET HEAD CAP SCREW.png"}],"description":"18-8 stainless steel socket head screw. To optics board.","name":"Socket Head Screw 1\/4\"-20 thread size, 3\/4\" long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"92196A540","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#92196a540\/=1dxstlt","supplier":"McMaster-Carr"},{"id":"1592805244","files":[{"url":".\/.\/usdata\/CRK525PMAKD-MicrostepStepperMotorSystemwithBuilt-inController(24VDC).png"},{"url":".\/.\/usdata\/Stepper Motor B547.dxf"}],"description":"Microstep stepper motor system with built-in controller (24 VDC).","name":"Microstep Stepper Motor System with Built-in Controller","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CRK525PMAKD","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/catalog.orientalmotor.com\/item\/all-categories\/pping-motors-with-built-in-controller-stored-data\/crk525pmakd","supplier":"Oriental Motor"},{"id":"1612010827","files":[{"url":".\/.\/usdata\/GN 479.1 Stainless Steel, Plain L-Shaped Mounting Brackets | JW Winco Standard Parts.png"}],"description":"Autofocus mechanism mechanical components.","name":"Plain L-shaped Mounting Bracket","manufacturing_instruction":{"steps":[]},"supplier_part_num":"479130","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.jwwinco.com\/en-us\/products\/3.7-Connecting-assembling-with-clamping-and-connecting-elements\/GN-479.1-Retaining-plates-Stainless-Steel#k%3Dc(30)","supplier":"JW Winco"},{"id":"1746782452","files":[{"url":".\/.\/usdata\/91292A009_TYPE 18-8 SS SOCKET HEAD CAP SCREW.png"}],"description":"Autofocus mechanism mechanical components. 18-8 stainless steel socket head screw.","name":"Socket Head Screw M2.5 x 0.45 mm, 5 mm long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"91292A009","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#91292a009\/=1dxt72m","supplier":"McMaster-Carr"},{"id":"134265758","files":[{"url":".\/.\/usdata\/47065T226_ALUMINUM T-SLOTTED FRAMING EXTRUSION-2.png"}],"description":"Autofocus mechanism mechanical components. Drop-in fasterner with ball, 1\/4\"-20 thread for T-slotted framing.","name":"Spring-Loaded Ball Fastener, for 1\" High Single Rail","manufacturing_instruction":{"steps":[]},"supplier_part_num":"47065T226","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#47065t226\/=1dxt8a5","supplier":"McMaster-Carr"},{"id":"430393902","files":[{"url":".\/.\/usdata\/90247A008_18-8 SS EASY-TO-INSTALL THREAD-LOCKING INSERT.png"}],"description":"Autofocus mechanism mechanical components. 18-8 stainless steel easy-to-install thread-locking insert. 6-32 thread size","name":"1\/4-20 to 6-32 Thread-Locking Thread Insert","manufacturing_instruction":{"steps":[]},"supplier_part_num":"90247A008","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#90247a008\/=1dxt9sw","supplier":"McMaster-Carr"},{"id":"595388234","files":[{"url":".\/.\/usdata\/92323A584_GRADE 5 STEEL SERRATED FLANGE HEAD CAP SCREW.png"}],"description":"Autofocus mechanism mechanical components. Grade 5 steel serrated-flange hex head screw. Medium-strength, 6-32 thread size, 3\/8\" long","name":"Steel Serrated-Flange Hex Head Screw 6-32, (3\/8\" Long)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"92323A584","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#92323a584\/=1dxtat2","supplier":"McMaster-Carr"},{"id":"634050904","files":[{"url":".\/.\/usdata\/47065T411_ALUMINUM T-SLOTTED FRAMING EXTRUSION.png"}],"description":"Autofocus mechanism mechanical component. Cut to 8.5 inch Length. Must Be Tapped for 1\/4-20 attachment to Base Plate.","name":"Aluminum T-Slotted Framing 1\" x 1\"","manufacturing_instruction":{"steps":[]},"supplier_part_num":"47065T101","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#47065t101\/=1dxtcmt","supplier":"McMaster-Carr"},{"id":"1947411957","files":[{"url":".\/.\/usdata\/PB4-AutoCADPDF.png"}],"description":"Autofocus mechanism mechanical component.","name":"Studded Pedestal Base Adapter, 1\/4\"-20 Thread","manufacturing_instruction":{"steps":[]},"supplier_part_num":"PB4","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=PB4","supplier":"Thorlabs"},{"id":"1172382293","files":[{"url":".\/.\/usdata\/CF175-AutoCADPDF.png"}],"description":"Autofocus mechanism mechanical component.","name":"Clamping Fork for 1.5\" Pedestal Post or Post Pedestal Base Adapter","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CF175","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=CF175#ad-image-0","supplier":"Thorlabs"},{"id":"1715516067","files":[],"description":"Provides a raised and secure platform for the laser to interact with the beam line of the microscope.","name":"Laser Stand Plate","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"1892880785","files":[{"url":".\/.\/usdata\/92196A060_18-8 STAINLESS STEEL SOCKET HEAD CAP SCREW.png"}],"description":"Replaces the standard screws in the feet of the laser unit and secures it to the Laser Stand Plate to ensure a fixed position. Thread may need to be verified by removal of current screws from the laser unit.","name":"Socket Head Screw 1\/4\"-20, 1\" long","manufacturing_instruction":{"steps":[]},"supplier_part_num":"92196A060","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.mcmaster.com\/#92196a060\/=1dxw1vp","supplier":"McMaster-Carr"},{"id":"1558918840","files":[],"description":"","name":"Custom XY Sample Translation Stage Mount Plate (6061-T Aluminum)","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"1997220404","files":[{"url":".\/.\/usdata\/CT1-AutoCADPDF.png"}],"description":"1\/2\" Translation Stage for Cage System","name":"Translation Stage for Cage System","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CT1","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=CT1","supplier":"Thorlabs"},{"id":"1332802642","files":[],"description":"","name":"Foam Core Board","manufacturing_instruction":{"steps":[]},"supplier_part_num":"S-19379","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.uline.com\/Product\/Detail\/S-19379\/Foam-Board\/Foam-Core-Board-16-x-20-Black-3-16-thick","supplier":"Uline"},{"id":"207421269","files":[],"description":"PLA filament","name":"Motor-to Differential Adjuster Connector","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"691502391","files":[{"url":".\/.\/usdata\/CXY1-AutoCADPDF.png"}],"description":"","name":"30 mm Cage System, XY Translating Lens Mount for 1\" Optics","manufacturing_instruction":{"steps":[]},"supplier_part_num":"CXY1","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"https:\/\/www.thorlabs.com\/thorproduct.cfm?partnumber=CXY1#ad-image-0","supplier":"Thorlabs"},{"id":"1940665063","files":[{"url":".\/.\/usdata\/PowerSupplyBox.STL"}],"description":"3D printed box to house the power supply for the autofocus stepper motor.","name":"Power Supply Box","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"552521340","files":[{"url":".\/.\/usdata\/FlatSlideMountBox-DualSlides-SpringVersion.STL"}],"description":"Base of the custom chambered coverslip holder.","name":"Chambered coverslip holder base","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"732866040","files":[{"url":".\/.\/usdata\/Spring Clamp For Chamber Slips Short End.STL"}],"description":"Is attached to 3D printed chambered coverslip base for securely holding samples. This side fits on the \"short\" side of the chambered coverslip, which is the side without a tab for the Lab-Tek II chambered coverslips.","name":"Spring clamp for chambered coverslip holder, short end","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"433864033","files":[{"url":".\/.\/usdata\/Spring Clamp For Chamber Slips Tab end.STL"}],"description":"Is attached to 3D printed chambered coverslip base for securely holding samples. This side fits on the \"tab\" side of the chambered coverslip, which is the side with a tab for the Lab-Tek II chambered coverslips.","name":"Spring clamp for chambered coverslip holder, tab end","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""},{"id":"2130531101","files":[{"url":".\/.\/usdata\/Spring Slider Clamp.STL"}],"description":"For custom slide holder.","name":"Spring Slider Clamp","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":""}]}

Loading...