{"authors":[{"id":"2144767450","orcid":"0000-0001-8443-1315","email":"wenzel.science@gmail.com","name":"Tobias Wenzel","affiliation":"University of Cambridge, Cavendish Laboratory"}],"bricks":[{"abstract":"An acylic door three 3d printed hinges and one printed magnetic door snapper knob","id":"1760371499","functions":[{"id":"794188998","description":"","implementations":[{"id":"794154344","quantity":3,"type":"brick"}]},{"id":"650033750","description":"","implementations":[{"id":"2019275653","quantity":1,"type":"brick"}]},{"id":"1356909439","description":"","implementations":[{"id":"38143630","quantity":1,"type":"part"}]}],"authors":["2144767450"],"files":[{"url":".\/.\/usdata\/doorknob.jpg"},{"url":".\/.\/usdata\/0-hinge (2).jpg"},{"url":".\/.\/usdata\/0-hinge .jpg"}],"long_description":"This is the ultimate digital-fabrication-DIY door, designed as part of a rostock max 3d printer enclosure. My design files can be seen and modified online in the enclosure Onshape project: https:\/\/cad.onshape.com\/documents\/d590c2db52ca428e97d68baa\/w\/b00a0e533d044792ac7fa99f\/e\/468f1fb1db04","instructions":[{"name":"assembly","steps":[{"files":[{"url":".\/.\/usdata\/hinge_assembly (2).jpg"},{"url":".\/.\/usdata\/hinge_assembly (1).jpg"},{"url":".\/.\/usdata\/engraved_panel_and_door.jpg"}],"description":"Cut the door on a lasercutter (don't forget to add the holes or other fixtues you need to put the door onto your hardware!). Print the door parts and prepare them. I recommend mounting the door parts after the acrylic sheets are mounted in their final location.","components":[]}]}],"name":"Acylic door with hinges and snapper","license":"CERN Open Hardware License","notes":""},{"abstract":"3D printed hinge with metal dowel pin, M3 screw fixings and strain relieve washer structure","id":"794154344","functions":[{"id":"1409057570","description":"Hinge","implementations":[{"id":"500541211","quantity":1,"type":"part"},{"id":"2092747198","quantity":1,"type":"part"},{"id":"24263995","quantity":1,"type":"part"}]},{"id":"1849489937","description":"Strain relieve bar","implementations":[{"id":"433441006","quantity":2,"type":"part"}]},{"id":"246176273","description":"M3 scews and nuts for assembly","implementations":[{"id":"405409125","quantity":4,"type":"part"},{"id":"256151276","quantity":4,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/0-0-hinge .jpg"},{"url":".\/.\/usdata\/hinge_assembled2.jpg"},{"url":".\/.\/usdata\/0-0-hinge (2).jpg"}],"long_description":"","instructions":[{"name":"assembly","steps":[{"files":[{"url":".\/.\/usdata\/hinge1.jpg"}],"description":"Print the hinge and try to fit the dowl pin to both sides seperately and remove print impurities with a razor blade if necessary. Then insert to connect the two halfs of the hinge, while the closed end is pointing down to stop the poin from falling out later.","components":[{"id":"1409057570","quantity":"1"}]},{"files":[{"url":".\/.\/usdata\/washers_hinge.jpg"},{"url":".\/.\/usdata\/Parts_hinge.jpg"}],"description":"Insert the M3 nuts into the washers (tight fit - press hard). Ready for assembly on the mounted acylic panels!","components":[{"id":"246176273","quantity":"4"},{"id":"1849489937","quantity":"2"}]},{"files":[{"url":".\/.\/usdata\/hinge (3).jpg"}],"description":"A small plastic step was added to both sides of the hinge design to enable a good print of the curvature with ABS (avoiding too steep overhangs). If these steps cause a problem with closing and opening the acylic doors after assembly, cut them smooth with a razor blade like I did (result shown in the image).","components":[]}]}],"name":"3D printed hinge","license":"","notes":""},{"abstract":"3D printed door knob and counter part with magnets and washers","id":"2019275653","functions":[{"id":"913146523","description":"Door knob","implementations":[{"id":"508013976","quantity":1,"type":"part"}]},{"id":"737486005","description":"Door counter magent holder","implementations":[{"id":"1226458112","quantity":1,"type":"part"}]},{"id":"670111055","description":"Screws and strain relieve washers","implementations":[{"id":"141642772","quantity":4,"type":"part"}]},{"id":"260402058","description":"Door-snapper magnets","implementations":[{"id":"727618408","quantity":2,"type":"part"}]},{"id":"2082234097","description":"M3 heat inserts to allow usage of M3 srews to mount prints","implementations":[{"id":"2075081577","quantity":4,"type":"part"}]}],"authors":[],"files":[{"url":".\/.\/usdata\/1-doorknob.jpg"},{"url":".\/.\/usdata\/0-door_knob_inverted.jpg"},{"url":".\/.\/usdata\/0-doorknob (2).jpg"},{"url":".\/.\/usdata\/doorknob (1).jpg"},{"url":".\/.\/usdata\/Parts_for_handle (1).jpg"}],"long_description":"","instructions":[{"name":"assembly","steps":[{"files":[{"url":".\/.\/usdata\/Parts_for_handle (2).jpg"},{"url":".\/.\/usdata\/Parts_for_handle (3).jpg"},{"url":".\/.\/usdata\/Handle_assembly (1).jpg"},{"url":".\/.\/usdata\/Handle_assembly (2).jpg"}],"description":"Print the door knob and counter part (do not enter magnets yet), and sink the m3 heat inserts into the predefined holes in the print with a hot soldering iron (just like it was done for the M6 inserts in the enclosure brackets). Make sure they sit slightly below the surface of the print, so the plastic touches the acylic sheets instead of the metal.","components":[{"id":"913146523","quantity":"1"},{"id":"737486005","quantity":"1"},{"id":"2082234097","quantity":"4"}]},{"files":[{"url":".\/.\/usdata\/Handle_assembly (3).jpg"}],"description":"Push the magnets into the holes and test the snapping of the two door parts.","components":[{"id":"260402058","quantity":"2"}]},{"files":[{"url":".\/.\/usdata\/Handle_assembly (4).jpg"},{"url":".\/.\/usdata\/Handle_assembly (5).jpg"}],"description":"I recommend to assemble the snapper on the acylic doors after they have been mounted on the 3D printer, unsing the M3 screws (10mm or up to several mm longer) and the printed strain release washers.","components":[{"id":"670111055","quantity":"4"}]}]}],"name":"Magnetic door snapper","license":"","notes":""}],"parts":[{"id":"405409125","files":[],"description":"M3 brass full nut","name":"M3 brass nut","manufacturing_instruction":{"steps":[]},"supplier_part_num":"FN00748","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"http:\/\/onecall.farnell.com\/unbranded\/m3-brass-full-nut\/m3-brass-full-nut\/dp\/FN00748","supplier":"onecall farnell"},{"id":"24263995","files":[],"description":"","name":"Steel parallel dowel pin, 4x32mm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"270-603","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"http:\/\/uk.rs-online.com\/web\/p\/dowel-pins\/0270603\/?searchTerm=Steel+parallel+dowel+pin+4x32mm&relevancy-data=636F3D3126696E3D4931384E4C446573635461786F6E6F6D794272616E645365617263685465726D32266C753D656E266D6D3D6D617463687061727469616C6D617826706D3D5E5B5C707B4C7D5C707B4E647D5C707B5A737D2D2C2F255C2E5D2B2426706F3D373426736E3D592673743D4B4559574F52445F4D554C54495F414C5048415F4E554D455249432673633D592677633D4E4F4E45267573743D537465656C20706172616C6C656C20646F77656C2070696E20347833326D6D26","supplier":"RS components UK"},{"id":"2075081577","files":[],"description":"M3 brass instert, unheaded, external diameter 4.4mm, body length 5.8mm","name":"M3 brass instert","manufacturing_instruction":{"steps":[]},"supplier_part_num":"2474921","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"http:\/\/onecall.farnell.com\/tr-fastenings\/m3-uhbrhesf\/brass-insert-unheaded-m3\/dp\/2474921?ost=M3+brass+instert%2C+unheaded","supplier":"onecall farnell"},{"id":"256151276","files":[],"description":"M3 screw, 10mm, any head (cheese, slotted)","name":"M3 screw, 10mm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"1419292","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"onecall farnell"},{"id":"727618408","files":[],"description":"","name":"disk magnets 10x3mm","manufacturing_instruction":{"steps":[]},"supplier_part_num":"TL16160","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"http:\/\/onecall.farnell.com\/eclipse-magnetics\/n812\/disc-magnet-neodymium-10x3mm-pk\/dp\/TL16160","supplier":"onecall farnell"},{"id":"500541211","files":[{"url":".\/.\/usdata\/Rostock Max V2 Enclosure - hinge left.stl"},{"url":".\/.\/usdata\/2015-10-20_165153.png"},{"url":".\/.\/usdata\/2015-10-20_164951.png"}],"description":"Hinge left print, here printed in ABS but other materials would also work","name":"Hinge left print","manufacturing_instruction":{"steps":[]},"supplier_part_num":"832-0315","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"RS components UK"},{"id":"2092747198","files":[{"url":".\/.\/usdata\/Rostock Max V2 Enclosure - hinge right.stl"},{"url":".\/.\/usdata\/0-2015-10-20_164951.png"},{"url":".\/.\/usdata\/0-2015-10-20_165153.png"}],"description":"Hinge right print, here printed in ABS but other materials would also work","name":"Hinge right print","manufacturing_instruction":{"steps":[]},"supplier_part_num":"832-0315","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"RS components UK"},{"id":"433441006","files":[{"url":".\/.\/usdata\/Rostock Max V2 Enclosure - strain relief.stl"},{"url":".\/.\/usdata\/1-2015-10-20_165153.png"},{"url":".\/.\/usdata\/1-2015-10-20_164951.png"}],"description":"Hinge strain ease print, here printed in ABS but other materials would also work","name":"Hinge strain ease print","manufacturing_instruction":{"steps":[]},"supplier_part_num":"832-0315","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"RS components UK"},{"id":"508013976","files":[{"url":".\/.\/usdata\/Rostock Max V2 Enclosure - magnetic grip.stl"},{"url":".\/.\/usdata\/2015-10-20_165625.png"},{"url":".\/.\/usdata\/2015-10-20_165746.png"}],"description":"Door Knob Print, here printed in ABS but other materials would also work","name":"Door Knob Print","manufacturing_instruction":{"steps":[]},"supplier_part_num":"832-0315","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"RS components UK"},{"id":"1226458112","files":[{"url":".\/.\/usdata\/Rostock Max V2 Enclosure - counter magnet holder.stl"},{"url":".\/.\/usdata\/0-2015-10-20_165625.png"},{"url":".\/.\/usdata\/0-2015-10-20_165746.png"}],"description":"Door counter magnet holder print, here printed in ABS but other materials would also work","name":"Door counter magnet holder print","manufacturing_instruction":{"steps":[]},"supplier_part_num":"832-0315","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"RS components UK"},{"id":"141642772","files":[{"url":".\/.\/usdata\/Rostock Max V2 Enclosure - washer.stl"},{"url":".\/.\/usdata\/1-2015-10-20_165625.png"},{"url":".\/.\/usdata\/1-2015-10-20_165746.png"}],"description":"Door fixing washer print, here printed in ABS but other materials would also work","name":"Door fixing washer print","manufacturing_instruction":{"steps":[]},"supplier_part_num":"832-0315","material_amount":"","manufacturer_part_num":"","material_unit":"NONE","url":"","supplier":"RS components UK"},{"id":"38143630","files":[{"url":".\/.\/usdata\/acrylic_door.png"},{"url":".\/.\/usdata\/acrylic_door.svg"},{"url":".\/.\/usdata\/acrylic_door.dxf"}],"description":"I designed the door from the attached SVG (Inkscape) file and cut it using the DXF file.","name":"Acrylic door","manufacturing_instruction":{"steps":[]},"supplier_part_num":"","material_amount":"","manufacturer_part_num":"Cast acrylic sheet, 4mm","material_unit":"NONE","url":"","supplier":"ENGINEERING & DESIGN PLASTICS LTD"}]}